If it seems to you that there are not enough cards in the game, and you want to try your hand at the new locality, but do not know how to do it, then this article will be very interesting to you, as it will be discussed on how to install cards in Minecraft PE. This process will not be so complex as installation. minecraft modsBut even in it there is your small nuances:
Instructions for installing cards for minecraft ne
- The first thing you need to do is from the relevant section of our site;
- Download the map to your device on the way
sDCARD / GAMES / COM.MOJANG / MINECRAFTWORLDS ; - All card is installed, and you can enjoy exciting gaming process on the new locality.
As you see this process is very simple and does not even require the installation of additional applications and special programs.
Installing cards in minecraft with file extension.mcworld
Installation:1. Download the Card with the extension.mcworld
2. Then find it and run, thereby importing into the game in automatic mode
3. Open the game and go to the selection of cards.
4. Your card will be listed
How to download a map for Minecraft PE?
- Go to the site website where are collected by categories
- Choose your favorite card you want to download
- At the end of the article there is a link to download the card
If you are tired of survival in can try to download and go through one of the cards for the IPPE! But how to install it on android? Let's figure it out!
In contrast to the installation of mods, the cards do not require much time, or rather almost do not require it at all. Especially if the map is in format " McWorld"Since it is enough to download the map from the section on our website to install it.
Then just click on the downloaded file, after which it is automatically imported into the game and all that you are required - it goes into Minecraft Pocket Edition.
How to install a map on the minecraft ne in Zip format?
- You need to download any file manager with the support of the archive unpacking, as an option you can use the "ES Explorer".
- Go to the download folder and find the downloaded archive, remove the folder from it with the card itself for MCPE.
- Remove the folder with the card to the following directory: /Storage/MoLated/0/Games/com.mojang/mincraftworlds/ . Unpacking the card may take from a few seconds, up to a few minutes. Depends on the size of the map. \\
Important: Do not forget to make sure that you have installed
Instruction
If you felt that Minecraft in his classic Ipostasi begins you gradually come, try to play it on other cards other than standard. You will find that the choice is extremely wide here. You can experience your "minecraft" skills in the face of the far planet or on an abandoned intergalactic station, in the flying islands (where the risk of falling into the abyss, losing all its own inventory), on sising pirate treasures and numerous earth hazards, in the medieval estate, on a huge Airship or ship, in a confusing labyrinth (which is full of hostile mobs), in twin towers, etc. The choice in this case is exclusively for you.
Lay on any of the sites offering software for Minecraft (including numerous additions to it) that meets your needs and idea of \u200b\u200bthe perfect gameplay card. Just contact only those sources that deserve confidence. Taking a card from a dubious portal, you may encounter the fact that it is at least not working, but as a maximum - the file with it is infected with a virus. Therefore, carefully check the resource from which you plan to download the material of this kind (for example, ask for those gamers whose opinions trust). Only then risk take the archive from there.
In the case when you are not satisfied with the ready-made cards, create your own. Use various mods for this (Too Many Items, Single Player Commands, Zombies mod Pack, etc.). Come up with interesting scene lineInstall the rules (make them clearly, on), enter the original name, mark the player's spa point and make the starting set for each of them. Be sure to check if your card is functioning normally. Now grab it. It is done equally - regardless of whether it is developed by you personally or downloaded from a resource in the finished form.
If the card is represented as an archive, take it up using a special program (WinRAR, 7zip, etc.) - otherwise it will not be able to put it normally. Lay now in your.mincraft folder saves. To search for the game directory, go on a disk with in Folder Users (for 7, 8 or Vista version of Windows) or Documents and Settings (in XP). In it, find the name of your user, open the Application Data there - and you will see the desired directory. Put in saves folder with map. Make sure its name does not coincide with those already there. Now run the game, click on the Single Player menu and then select the name of the installed card just installed.
Question icon - Help.
When you select the upper user button, reincarnize the file sharing, where this card is stored.
In this picture, the file has format.rar. This archive format opens by archivers (see Figure).
When opening .Rar file will come out such (or other, depending on the archiver window, the article will be told on the example of WinRAR).
After you need to press the label with the right mouse button and click "Location File" after the left button.
The folder with the game should be a folder "SAVES".
We must go there. If there is no such folder in the play folder, you need to create it by pressing the right mouse button.
The name folder must be "saves" (without brackets) and in no way differently.
In the future, all downloaded and created cards will need to throw there.
By creating a folder, you need to return to the archiver (Figure 10) and click on the "Extract" button.
After selecting the path, extraction will begin.
It will continue not more than 10 seconds.
After graduating, the archiver can be closed.
That's all! You just need to start the game and the card will appear in single game mode.
How to make your Minecraft game card?
Make your invention very simple, but that the finished card does not bother quickly, you need:
- Have a wide imagination. Then the card will be big and it will not come out in 3 minutes.
- Have time. To create big card You need a great time.
- Pay attention to absolutely every little thing, each pebble and every leaf. Then the card will have less "lags" - errors that interfere with it to work well (for example, she walked on the road and suddenly failed simply because the cube that the character did not have a firm body).
- Good to know english. Usually when creating a card interface in English.
First you need to choose the game version for which the map will be developed. It is better to choose the game version 1.8 or higher.
After in the game, you need to go into the "Creativity" mode and there it is necessary to find the "Settings of the World".
Translated this "settings to world." It is necessary Disable generation of buildings.
After you need to choose a flat type of world. After you can start creating a map.
After choosing the world, you need to choose for which game mode will create a map.
Survival (survival) or adventure (Arcade)?
Choose to you.
Based on the selected mode, you need to think about how many objects need to be created.
If the adventure, then you need to come up with the plot, and for survival it is necessary to have more enemies and smaller (a little is still needed, otherwise the character will die from exhaustion) food.
Creating a map
It is believed that the WORLEDITIT program will help to create the players in creating a map, which can be downloaded for this link.
DownloadYou can first add a lot of many blue and white squares - the sky and clouds.
Of course, you need to add cubes of paths to the village and next to the path brown cubes (wooden fence) along with small houses.
And a couple of inhabitants. To the residents need to be applied to the action so that if the player approached, there was a "talk" icon.
To residents also need to add text of the conversation about the kidnapped girl.
Not far from the village will need a lot - many green and dark green cubes - trees.
Also need several white and black cubes - slippers and spiders. The more cubes - the greater the object.
If there is an opportunity, you do not need to draw them - just add them from the animal section (unless of course there is such).
After you need to add a blue river, and subsequently a brown mountain with a white vertex and some small gray castle details.
Then again the terrain (even, for every taste).
Draw lava ditch (red and orange colors) as well suspension bridge Of particular work will not be.
The most difficulty will draw a big castle and that even worse - the staircase and room inside it.
In the picture, the bridge is not wooden, but stone (gray cubes) and leads directly through the lava lake straight to the entrance.
You can draw something like this, but the lock must necessarily be brick or stone.
After it is necessary to add an invisible (until the opening of the cell) portal.
Well, of course, the enemies, a girl, a cage (should not be breaking so that it could not be broken during the battle with the boss), the room and the key.
So, when, finally, then (what a horror, I will take so much time in her!) The card will be created, it will need to be preserved as an ordinary game world.
This can be done by clicking on "SAVE" or "SAVE AS NEW WORLD / MAP / GAME / LEVEL".
The card will be saved to the "Saves" folder, which was mentioned above.
There is a folder in the folder .minecraft games.
Now the map needs to be tested for performance and fully pass it yourself.
If there are unfinished - fix in the same program. But not scary, it will not have to do it again.
It is enough to open it from the "Saves" folder. After graduation, save and test again.
Subsequently, they will be very useful.
And now almost everything is ready! Now you just need to get out of the game and go to the "Saves" folder.
Opening it, you need to create a new folder with the name of the card and copy the created card there.
After on the folder to which the map will be copied, you need to click on the right mouse button and select "Add to the archive" folder name ".
After pressing the program (in this case, WinRAR) will begin to archive itself (i.e., to pack in one file) the folder with the card.
Do you own your own server in Minecraft? But you are not able to build anything worthwhile by yourself, and your friends are tired of playing in the Minecraft world? No problem! In such cases, there is a single output - download and install the map you like to your server. Especially for you, many players work on maps creation. You can only find and download the desired. Next you need to transfer it to your server. And how to set the map in Minecraft, will be told in this article.
To begin with, we understand that and what they happen. In the "minecraft" map - this is a kind of system consisting of directories and files of different typeswhich carries information about blocks and their location. Cards can generate an unlimited number of times, however, they have a limited size: for example, the highest building should not exceed 256 blocks into the height, and the entire map should not occupy more than 13 million blocks. But it is not worth upset, 13 million blocks are a lot. The study of the card in 2-3 million blocks will leave the player for several days, and what to say about 13 million. Cards are multiplayer and single-user. It is easy to guess that the main criterion of this separation is the number of players.
Before installing the map in Minecraft, you need to decide on its choice. It's simple. Mines in Minecraft - it is very a good thing. There are cards "adventures", there are cards for passage. If the main goal is to go through all the tests of one or friends, the cards in Minecraft are a very fun task. And there are cards that do not carry anything but beautiful design. Here you can only admire the buildings. The most valuable are the maps built by hand, also often they are the most beautiful. They are created without various generators and are used to pass the game.
Now let's turn to the question: "How to install a map in Minecraft?" The answer to this question is very simple. By the way, I will immediately say that there are two types of installation of cards: in single-user and multiplayer modes.
Option 1
The multiplayer mode assumes that it is necessary to find a map to it, which must support the multiplayer (therefore the choice is significantly narrowed). Then you need to unzip the archive (most often the card is downloaded in the form of WinRar), then you need to copy all files from the archive to the folder / Minecraft / World /. If you need to replace the files, do not be afraid, calmly replace. Then run your server and wait until the card is fully loaded. The download time depends on the size of the map, so be prepared for long wait.
Option 2.
In single-user mode, you also need to download a map, but it will fit absolutely any card comparable to your version of the game. Then you need to find the "saves" folder. On Windows 7, this folder can be found as follows: in the search bar We write% AppData%, then find the folder .mineCRSFT / SAVES, then transfer all files from the archive to the folder found. On Windows XP, this folder can be found by writing in the search for "execute", and in the window that opens, register: "% appdata%", then - you know.
The article ends, I hope, I helped you with a solution to the question as to how to install the map in Minecraft.
