Almost all tank players install mods on their client. This is done to increase your statistics, drag even better, change the visualization of the gameplay for yourself and make the game even more comfortable. Recently, however, the question has increasingly appeared - "How to remove World of Tanks mods?".

Someone, in desperation, reinstalls the entire game, wasting an insane amount of time. Others try to clean up the client with a fresh install of the modpack. However, there is a much simpler method and you should not be afraid of this process, because it takes less than a minute, while doing absolutely no harm to the game itself.

Let's break the process of removing mods in World of Tanks into several points for clarity:

1. First of all, you should go to the game folder. That is, in the place where you installed the tanks.

2. Now that you have found the folder with the game, you need to find another folder in it, it is called "res_mods", go into it.

3. After you have entered the "res_mods" folder, you just need to delete all its contents, as shown in the screenshot below. This completes the removal of World of Tanks mods, the client is clean.

Find out how to improve the game and find the right mods right now. In our article, a detailed story on how to install additional modifications without losing the quality of the game.

Quite often, after moddings have been installed on the WoT game, the interface almost immediately disappears for the players, the FPS “sags” or the client does not start at all. It's all to blame for the fact that most of the mods that are widely used to improve the gameplay are absolutely not compatible with each other. And you can optimize them and combine completely different modifications only in special assemblies (the so-called modpacks). In addition, some players who actively use this kind of improvements, after some time, they are completely removed due to uselessness - most often this happens with skins with penetration zones, because. the player, having studied the most vulnerable places, no longer needs them. And this is where the logical question arises: how to remove moddings without affecting the integrity of the client?

Removing patches at once

All those who play WoT are well aware that game mods are stored in the res_mods folder, the path to which looks like this: C:/World_of_Tanks/res_mods/. And to be specific, it also contains folders with the names of the current patches, which, in turn, contain all the improvements. In order to disable them at once, you just need to clear the contents of the res_mods folder. However, if you only need to destroy skins with penetration zones or a single sight, then you will have to act differently.

Selective removal of modifications

As you know, for each individual modification in the "World of Tanks" there is an individual folder. For example, scopes are installed in gui/scaleform/, and skins are installed in the venicles folder. And in order to disable a particular modifier, you must exclude its folder from the shared directory.

If you plan to erase scope mods, then you need to open the C:\Games\World_of_Tanks\res_mods\0.9.x\gui\scaleform folder and delete all files that start with "crosshair".

And if you intend to get rid of skins with penetration zones, then you should completely delete the C:\Games\World_of_Tanks\res_mods\0.9.x\venicles folder. Want to leave skins to a specific nation? Then just open the venicles folder and delete unnecessary subfolders by their names.

The hardest

But the most difficult thing is to erase the game improvements located in the \res_mods\0.9.X\gui\flash folder. Basically, zoom moddings, damage panels, as well as a tank carousel, OVT, info panel, etc. are loaded into this directory. In order to destroy anything from here, you need to open the archive, then erase from \res_mods\0.9. X\gui\flash those files that are already in the archive. Only this way will allow you not to damage the rest of the mod.

Mods from Jove - a chic set of modifications, functional extensions and graphical improvements for the online game World of Tanks. In each version of the assembly of mods, the Jove team puts the maximum of gaming convenience and information content. There are new add-on panels, alternative versions of voice acting, skins and many other useful things that increase the level of gameplay at times.

However, some WoT fans who want to get acquainted with the innovations of Jove or abandon them altogether (i.e. disable mods) face characteristic problems:

• modpack does not work after installation or does not work correctly;
• program conflicts arise;
• the game client does not start, etc.

To avoid them, you need to properly remove mods from Jove from your PC. Let's consider several ways to solve this problem.

Method number 1: setting up the installation of a new version

When installing a new build, check the "Remove all installed mods" option (click the radio button) and then click "Next". In this case, the installer will first clear the contents of the folder and delete the "configs" and "mods" folders in the res_mods directory. And thus eliminate the occurrence of any problems associated with the compatibility of earlier versions.

If you have other mod packs installed, it makes sense to use the "Delete all mods and ..." function (the first item in the installer settings). Along with the global cleanup, the installer will "zero out" the profile.

Method number 2: standard uninstall

1. Click the "Start" button (lower left corner).

2. Select Control Panel.

3. Go to the "Programs" section and click the "Uninstall a program" option.

4. In the directory of the installed software, right-click on "Jove`s Mod Pack ...".

5. Click "Delete" in the additional window.

6. Confirm your intention to remove all elements of the modpack: click "Yes".

Note for Jove mods 0.9.8.1 (wotsite.net build)

When this version is installed, the software list displays two assembly components (that is, two almost identical names in the list):

1. The main application without a signature in the column "Publisher" (668 Mb). Removed as described above.

2. Additional - with the signature of the publisher "wotsite.net" (142 Mb). When you try to remove it by regular means, an error appears and a proposal to remove it from the list. Agree to these actions: click Yes.

Once the cleaning process is complete, send the Jove Mods and WOT Riflescopes tags to the trash. They are not associated with executable files and only perform a quick launch of the browser with the given pages of the wotsite resource.

Method number 3: uninstaller programs

Below is a step-by-step instruction for removing a modpack using the Soft Organizer utility. But in the absence of such, you can use other applications similar in function. For example, CCleaner, RevoUnstaller, UninstallTool, etc.

1. In the Soft Organizer window, in the “Program” panel, select “Jove`s Mod Pack…” with a mouse click.

2. Click the "Uninstall a program" button located just above the list.

3. Confirm the deletion of the specified items. In the "Uninstall" window, select "Yes".

4. Click "Find" to start scanning the remaining items.

5. Perform cleaning by clicking the corresponding option in the interface.

Method number 4: "from scratch"

If there are a lot of installed mods, new versions are installed over old ones, etc., then it is more expedient to completely remove the client, including all its directories, registry entries and, accordingly, modifications. This procedure is also best performed using special utilities (Soft Organizer, RevoUninstaller). Since standard tools do not always clean effectively.

After WoT elements are neutralized, it is advisable to clean up the OS with applications such as CCleaner and Reg Organizer. And only then proceed with the installation of the World of Tanks client and all additional modpacks.

If you often experiment with modifications: disable old ones, “screw on” new ones, use patches or make any changes to them yourself or directly to the client, always keep the game installer and proven mods (100% working) at hand. If there are any, reinstallation, setting up WoT will take only 10-15 minutes.

We wish you new victories and hot battles in the exciting game world of World of Tanks!

Almost no gamer imagines his game without additional settings, of course unofficial. Without all kinds of cheats and mods, not a professional, a player or a beginner can not do.

If you are an avid "tanker" in World of Tanks, or just a beginner amateur, then mods will be more useful than ever for you to achieve victory.

Mods allow you to change literally the entire gameplay in the game, from textures to individual, special abilities of your tanks and interface. In addition, in WoT, thanks to the idea of ​​the developers, you can easily change the game to suit individual requirements.

What mods are for and the main problems that arise when installing them

The earliest mods for WoT were the same "skins" and the installation of special sights. The only drawback of mods is that only you see them in the game, while the rest will see the standard game interface without your additional settings.

The disadvantages of modern mods, especially fresh versions for the latest releases of the game, include frequent lags that occur during the game itself. Under such conditions, most players become uninterested in what is happening with artillery and tanks, and the need to fix the game comes to the fore.

Therefore, if you notice that the game began to freeze often, abruptly knocks out during its work, the same problems with graphics or sound have arisen, the cause of all this may be a low-quality mod.

Very often, game freezes can provoke mods that conflict with each other. You can easily identify them, just remember which mod you installed last, or after which you started having problems with World of Tanks, then you will immediately understand the cause of your problem.

Also, the mod can introduce a number of bugs into your game precisely because of incompatibility with the game version. Therefore, we strongly recommend that before downloading any add-on for your game, first determine the compatibility of the versions.

You can also consult with other players on the forums who will be able to tell you exactly which mods are causing problems with the game. It often happens that mod developers have completely different goals, creating additional installations for games.

How to quickly get rid of buggy mods in the game

And so, your game stopped starting, started to hang, etc., due to mods, then this problem can be solved in the following ways.

In the first method, you need to find the root folder of your game, which looks something like this - Hard Drive (C:) \ World_of_Tanks \ res_mods \ (version), the correspondence is optional, it all depends on the build of your game and where it is installed. It is worth noting here that all installed mods are located in the res_mods folder.

If you decide to completely clear the game, then you need to go to this folder, there will be a folder with the version of your game, you select it and simply delete it. We leave the res_mods folder in order to always know where your mods are installed.

In the event that the above manipulations did not help, the game should be reinstalled again. You can also remove mods using special programs, but manual cleaning will be much easier.

Mods are not evil. Often they help players and ease the load on memory, for example, showing the last location of an enemy missing from the light. But how to remove mods in World of Tanks when they are tired, interfere or do not allow you to enter the game at all? Let's consider this question.

How to remove a mod: instructions

Before adding to the game, you need to know that mods without an installer (which are downloaded into the game using the "Copy → Paste" operation) must be copied to the "res_mods" folder, and not to "res" or "res_bw". Therefore, to remove all mods, follow these instructions:

1. Close the game.
2. Open the game folder.
3. Open the "res_mods" folder.
4. Delete all folders in the open directory.
5. Create a folder with the name of the current game update. Go to the official website of World of Tanks and find the update version in the background image, for example "9.1". So, you need to create a folder "0.9.1". (At the time of this writing, version 1.0 of the game has not yet been released.)
6. Start the game.

If the game has not fully returned to the default settings, you need to reinstall World of Tanks. The reason may be that the mod, after installation, overwrote the game files located in the "res" folder.

In the case when the mods were installed using the automatic installer:

1. Go to "Control Panel" → "Add or Remove Programs".
2. Select the line with the installed mod.
3. Click Remove.
4. Confirm deletion.

To protect yourself from all sorts of incidents, it is better to play the game without mods. If you use them, then only the works of famous authors. For example, modpacks (collections of mods) are Amway921, Jove, Vspishka and others. It is noteworthy that for each new World of Tanks update, you need to install a new modpack, and these people provide them within a few hours after the release of the update.